‘Home sweet home’ teabag quilt

I have been enjoying hand sewing very much recently, so I decided to make another tea bag quilt. A few people have asked how I made my first one so I thought I would do a step by step. My friend Fran Halperin and I have been experimenting with joining techniques. Fran has been using her sewing machine.

On the left zigzag stitch, on the right she has straight line stitched along the edge of the teabag and then jumped over the gaps.

On the left I used blanket stitch on the right for my new quilt – I back stitched the tea bag onto material. NB try and use something with very little ‘give’ – I used an old linen nappy and it’s very difficult to sew neatly on top of.

I decided to make my ‘ Home sweet home’ quilt have a more quilt like feel- the last one was a bit abstract. I printed some tea bags blue/ purple and others pale blue/ white. With my doors and window hand carved stamps .

The tea bags were a bit higgledy piggildy on the linen so I decided to add some strips of kitchen towel ( dyed with tea during the drying of teabags process) with writing on between the rows and buttons at corners. This stitching held on the back piece which is a white tea towel

I am edging the quilt with a sheet of used colour run paper/ fabric that goes in the washing machine. It needed 3 rows of running stitch to keep it flat. I used white sewing cotton throughout. I think I will print over this again when it’s stitched all around

Nearly finished. It needs a few more buttons and I haven’t stitched the edging all the way round but you get the idea.

I wanted this quilt to be a bit more obvious that it was teabags. I haven’t used any glue on the joints so that it feels much more like fabric

I think I need to do a bigger one ……

ICAD 2018

I am really enjoying making digital images for this years icad challenge. I don’t get the same art buzz working digitally in comparison to working in a messy paint way but it’s still fun.

I tend to start off with an image that’s on my camera roll or a found image. Then I just play with it in Freemix / imageblender/ my iPhone editing app until I am happy with the result

Today was Portrait

So I used a selfie from a few weeks ago. I can’t remember what I was pulling that face for.

I knew there had to be a mandala as a layer

Then I went straight into Image Blender

I particularly liked this image –

but the pattern felt too strong on my face so I edited it in my iPhone editor

I decided to crop the image for the final choice

Teabag quilt

I have been working on teabags for the past few months. I am getting very tired of the tea leaves and soggy bags hanging around my kitchen drying.

I have been making small quilts A4 and 9 teabag sized efforts as part of my #teaandhome project. This looks at what ‘home’ in Edinburgh means to me after living here for 5 years. Drinking redbush tea is a big part of that. Jon drinks builders tea. The juxtaposition of the circles and rectangles has been interesting to play with in terms of teabag strings , mini journals and now quilts.

I had been playing with my hand carved stamps and layering the teabags with mandalas, text, hand written and printed. I was thinking of sizes in-terms of mounting them. However it struck me at 4.30am the other day that they might make a nice larger piece.

So I laid them out on the table. This configuration was too long and thin.

This felt a bit abstract and the fill in bags looked a bit out of place. So I printed sections of mandalas on the blanker bags and then added circular bags to the design.

All the layering and sewing has made some of the joints a bit fragile so I am wondering how to proceed.

Idea one- is to quilt it with padding and a back.

Idea two – to use an iron Vilene (interfacing) on the back

It is for a seminar that Jon and I are presenting in September and it would be good if people can touch it – without making holes in it.

I am leaning towards the Vilene and maybe a trim around the edge

I will keep you posted

I seem to have forgotten to post pics of my hand carved rubber stamps – here is the set I used on the quilt

Finishing off my tea and home mini journal

Tea bags with white acrylic paint ready for stamping

Trial stamping of my cup and saucer stamps

Added the poem

I decided to add teacups to the two blank pages.

When the glue has dry- fold the joints and glue the two strips together only attaching the first and last panels. I use gel medium.

When storing you will need to add grease proof paper between layers. For some reason the gel medium stays slightly sticky on tea bags.

Tea and home

Tea is an important drink for me. I have been using it in my art . Last year I had a spate of dipping paper in tea to add layers. So using bags as a substrate seemed an easy step. I have been making collaborative tea bag chains with my friend Fran in California.

Where we sewed old dried bags together and then decorated them sending them back and forth to each other adding layers.

I am laid up at the moment with a sore knee and needed a project that would be a bit fiddly and keep me sitting still ….. I decided to have a go at repeating the zine fold mini journal – but by sewing old teabags together.

I used my hand carved rubber stamps of doors to decorate this one – keeping within my current theme of ‘home’

Preparing the tea bags is a bit time consuming. Fran in California can let them dry out side full of tea leaves. In Scotland I have to empty the leaves whilst damp, which means they can rip a bit , let them dry, and then remove the last dregs of leaves. (Jon is being very patient.)

When the bags are dry I sew 4 together using blanket stitch.

I found that I need 8 – 4 for each side of the mini journal and to give the opening of the ‘zine fold’ and strength to the design

I am having fun messing around adding my normal layers

These above are doodled on and then stencilled White acrylic

Below – I doodled with a water soluble purple pen and spritzed

The I added the white acrylic and spritzed orange ink through a stencil

The next stage is a layer of gel medium so that the seams and any ripped bags are reinforced.

Then I add a white rectangle of white acrylic to each bag/ page – I tried stamping on the teabag itself but my inks were lost on my mad backgrounds.

I decided to write a poem about my relationship with tea and Jon, I don’t know why it always tastes better when he makes it.

Tea and home

He brings me one in the dark

6am

Sometimes I am not ready

For the perfect cup

The correct heat

The right strength and amount of milk

It sits cooling as I check my social media

At other times I sip the almost scalding liquid

As it hits the right spot

Sigh -(exhale make the right noise)

‘That’s the best cup I have ever tasted’

It feels like home.

I thought I would add the poem to a tea based mini journal.

I hand carved a few tea cup rubber stamps to use as decoration.

I have given up trying to be too neat and tidy. Carving so small with my tiny v blade seems to create simple almost naive shapes that I quite like.

Rubber stamp carving

I have always liked Lino cutting and really enjoy the feeling of cutting into butter that you can get when carving rubbers. I use Lino and wood cutting tools. Last year ‘The ‘Flying Tiger’ stores sold kits. https://uk.flyingtiger.com/ which were very reasonably priced.

I have been wanting to add to my Edinburgh building collection – I have a stamp of the Scott Monument that I have used regularly in my art over the past couple of years

I wanted to do an Edinburgh Castle. I found a view without too many crenellations. I always draw designs on the rubber with biro- it’s easily removed if you make a mistake and is a good sized line to cut.

The problem with making stamps is that they have to be a reflection of what you want printed …. the Scott Monument is symmetrical …..

I now have a fab back to front stamp of the Castle. I decided to leave the back ground in the stamp and to carve at an angle so that it looks like rain …..

I look out for rubbers in office supply shops and Paperchase sales have been a great source they reduce their’s in different shapes and sizes down to 50p regularly.

I was so fed up with my back to front Castle, that I had a go at doing a variety of smaller stamps

I wanted to try a mandala – this is quite tricky because you have to decide what you want black/ white/ line etc – instead of just solid shapes. I am not naturally neat enough to do very neat complicated designs, when cutting.

I was pleased with this one so I did another. Remembering to take some prints when it was just an out line, so that I could do two colour printing

I also really liked the bird design so I added it to a pen and ink mandala

The bird worked so well I decided to carve a larger design with 6 birds

This uses the Flying Tiger rubber blocks – which look like liquorice Allsorts from the side – they are layers of colour so that you can see how deep you need to carve. Which is very handy.

The blocks come in black and white or blue and pink ( when you can get them ….)

Below is a selection of prints. I used acrylic paint applied with a paint brush ……..

Below is a collage of some art journalling pages I added the stamps to

Making ‘zine’ formats

I can’t remember if I have written about these before. I like working in a ‘zine’ format because of the 3d element. My friend @dar63 on Instagram started making some recently and I loved her lush layers and jewelled colours do I asked her if she fancied doing some collaborations. We have worked together in the past.

You can tell which pages are mine because of the black ink doodles 😂😂

I have been experimenting with using water soluble pens and spraying my mandalas so I used some of these as a base layer.

I added designs to the front and the back and added gesso to surface to seal it and add texture

I added a variety of things to the surface

Strips of typed text, large text, more gesso, stitching, white pen , spray ink and magazine images.

I like drawing of the inside of the zine. So that when they are standing up you get an interesting juxtaposition of the two sides

The bottom design in the above pic includes a zine designed by a friend Fran that is based with me in Edinburgh.

I hand stitched the edges in this case